CLAUDE.md

@@ -13,16 +13,16 @@ A Fedora automated mass-installation and post-setup scripting collection. It use
 
 Before any script runs, copy the dist file and fill in your environment:
 ```sh
-cp /opt/sys_config/config/setup_system.conf.dist /opt/sys_config/config/setup_system.conf
+cp /opt/sys_config/system_setup/config.dist/setup_system.conf.dist /opt/sys_config/config/setup_system.conf
 # Edit setup_system.conf with your domain, server FQDNs, paths, etc.
 ```
 
 Local per-machine overrides go in `config.d/*.conf` (gitignored). These are sourced after `setup_system.conf` and can override any exported variable (e.g. `config.d/system_defines.conf` overrides `UPGRADEBRANCH`).
 
-`config/skel.tar.zst` (gitignored) holds the `/etc/skel` archive deployed to new installs. The `.dist` version is the default. To modify skel: extract, edit, then repack:
+`config/skel.tar.zst` (gitignored) holds the `/etc/skel` archive deployed to new installs. The `.dist` version is at `system_setup/skel/skel.tar.zst.dist`. To modify skel: extract, edit, then repack:
 ```sh
 cd /opt/sys_config/config
-tar -I 'zstd -9' -cf skel.tar.zst skel/   # or use pack_skel.sh
+tar -I 'zstd -9' -cf skel.tar.zst skel/   # or use system_setup/skel/pack_skel.sh
 ```
 
 ## Installation lifecycle
@@ -51,7 +51,7 @@ tar -I 'zstd -9' -cf skel.tar.zst skel/   # or use pack_skel.sh
 | `system_setup/mount_ecrypt_home.sh` | user | called by logon_script.sh |
 | `system_setup/mozilla_starter.sh` | user | called by logon_script.sh; args: `firefox\|thunderbird run\|sync [profile]` |
 | `system_setup/setup_skel.sh` | root | called by setup_system_full.sh or manually |
-| `config/pack_skel.sh` | root | manually, to repack skel archive after editing |
+| `system_setup/skel/pack_skel.sh` | root | manually, to repack skel archive after editing |
 | `system_setup/create_nc_package_from_sys_config.sh` | user | manually, creates `~/temp/sys_config.tar.zst` |
 
 ## client_software layout

install.md

@@ -44,7 +44,7 @@ Both are optional. That way, install.sh should know what to pull.
 Configure your environment before running any installation:
 
 ```sh
-cp /opt/sys_config/config/setup_system.conf.dist /opt/sys_config/config/setup_system.conf
+cp /opt/sys_config/system_setup/config.dist/setup_system.conf.dist /opt/sys_config/config/setup_system.conf
 # Edit setup_system.conf — set TLDOMAIN, SERVERFQDN_IPA, SERVERFQDN_NC, and paths.
 ```
 

system_setup/config.dist/setup_system.conf.dist

@@ -21,14 +21,13 @@ export DISTCONFIGPATH_SRC="/Shared/sw_geteilt/client_settings"
 export CLIENTADMINGROUP="clientadmins"
 
 # Method to determine Unique Hostname / FQDN of the Client. May be replaced by your needs
-#Should always had been set by install.sh and should be there anyway.
-#if [ ! -r ${SYSCONFIGPATH}/config.d/machine_uuid.sys ]; then
-#elif [ "$EUID" -eq 0 ]; then
-#    export HOSTNM="pc-$( dmidecode -t system | grep -i 'UUID' | sed 's/UUID: //' | tr '[:upper:]' '[:lower:]' | sed 's/[^0-9a-z]*//g' | xargs|tail -c 13)"
-#else
-#    export HOSTNM=$( hostname -s )
-#fi
-export HOSTNM="pc-$( cat /opt/sys_config/config.d/machine_uuid.sys )"
+# MACHINEID should be set by install.sh. The Determination is done by setup_system.inc.sh as root for old installs.
+if [ -z ${MACHINEID} ]; then
+  #Fallback if not configured, should only be needed once for very old installations
+  export HOSTNM=$( hostname -s )
+else
+  export HOSTNM="pc-${MACHINEID}"
+fi
 export FQDN=${HOSTNM}.${DOMAIN}
 
 #Additional Client-Software- Repository-Folder in Nextcloud (Shared Folder / Systemwide)

system_setup/configure.sh

@@ -5,7 +5,7 @@
 # SPDX-License-Identifier: AGPL-3.0-or-later
 
 SCRIPTDIR="$(cd "$(dirname "$0")" && pwd)"
-CONF_DIST="${SCRIPTDIR}/../config/setup_system.conf.dist"
+CONF_DIST="${SCRIPTDIR}/config.dist/setup_system.conf.dist"
 CONF_FILE="${SCRIPTDIR}/../config.d/configure.conf"
 
 if [[ "$EUID" -eq 0 ]]; then

system_setup/setup_skel.sh

@@ -3,7 +3,7 @@
 source $(dirname "$0")/setup_system.inc.sh
 EXECDIR=$(pwd)
 SRCFILE="${SYSCONFIGPATH}/config/skel.tar.zst"
-SRCFILEDIST="${SYSCONFIGPATH}/config/skel.tar.zst.dist"
+SRCFILEDIST="$(dirname "$0")/skel/skel.tar.zst.dist"
 
 #Check for root
 if [ "$EUID" -ne 0 ]; then

system_setup/setup_system.inc.sh

@@ -16,6 +16,19 @@
 #    return 0
 #}
 
+#First, get the machine_uuid wich is needed by some userspace programs.
+#As all Parameters that are bound to CPU or Mainboard, are only readable by root, we need to get the values at installtime.
+#On old installations without the file, we will write it whenever possible
+if [ -f $( dirname "$0" )/config.d/machine_uuid.sys ]; then
+    export MACHINEID="$( cat $( dirname "$0" )/config.d/machine_uuid.sys )"
+elif [ "$EUID" -eq 0 ]; then
+    dmidecode -t system | grep -i 'UUID' \
+    | sed 's/UUID: //' | tr '[:upper:]' '[:lower:]' \
+    | sed 's/[^0-9a-z]*//g' | xargs | tail -c 13 \
+    > "$( dirname "$0" )/config.d/machine_uuid.sys"
+    export MACHINEID="$( cat $( dirname "$0" )/config.d/machine_uuid.sys )"
+fi
+
 #Check for configure.conf - used for frist setup of system
 if [[ -f $(dirname "$0")/../config.d/configure.conf ]]; then
     echo "System in configure-mode. Will use $(dirname "$0")/../config.d/configure.conf for setup."
@@ -23,7 +36,7 @@ if [[ -f $(dirname "$0")/../config.d/configure.conf ]]; then
 else
     #Load default system setup file
     if [[ ! -f $(dirname "$0")/../config/setup_system.conf ]]; then
-        echo "System configuration not found. Please make a copy of setup_system.conf.dist, name it setup_system.conf and check the settings in it before running."
+        echo "System configuration not found. Please copy system_setup/config.dist/setup_system.conf.dist to config/setup_system.conf and adjust the settings before running."
         echo "Press any key to continue" && read -n 1 -s -r && exit 1
     fi
     source $(dirname "$0")/../config/setup_system.conf

system_setup/skel/pack_skel.sh

@@ -1,7 +1,6 @@
 #!/usr/bin/env sh
 # Usage: will make a tar-file from folder skel found in the directory where executed
 # If you want to change skel- content, extrakt your skel.tar.zstd to this directory, edit the files and use this script to repack
-source $(dirname "$0")/setup_system.inc.sh
 mv skel.tar.zst backup_skel.tar.zst
 if [ $? -eq 0 ]; then
     echo "Old Archive renamed to backup_skel.tar.zst"

system_setup/sync_client_software.sh

@@ -20,15 +20,20 @@ fi
 
 #Install or update Nextcloud com.nextcloud.desktopclient.nextcloud
 echo "Update or install Nextcloud client"
-/usr/bin/flatpak remote-add --if-not-exists flathub https://dl.flathub.org/repo/flathub.flatpakrepo
+/usr/bin/flatpak remote-add --if-not-exists flathub https://dl.flathub.org/repo/flathub.flatpakrepo && \
 /usr/bin/flatpak install -y --or-update --noninteractive flathub com.nextcloud.desktopclient.nextcloud && echo "Done Update/Install of Nextcloud."
+if [[ $? -ne 0 ]]; then
+    echo ""
+    echo "There seems to be a problem with your network connection. Please first check, if your network can be established before reuming."
+    echo "You can press CRTL+C to abort now. Than your data wont be accessible and you need to run \"$0\" again."
+    echo "You can also continue without network. You may need your personal encryptionkey for accessing your data."
+    read -n 1 -s -r -p "Please check Network and press any Key to continue"
+fi
 echo ""
 
-#Sync remote Files
+#Do an upgrade of the Base package if its configured and if there are changes
 chown root:${CLIENTADMINGROUP} -R ${SYSCONFIGPATH}
 chmod ug+rwX,o=rX -R ${SYSCONFIGPATH}
-
-#Do an upgrade of the Base package if its configured and if there are changes
 if [[ ! -z "${UPGRADEURL}" ]]; then
     echo "Checking for Upgrades on ${UPGRADEURL} and Branch ${UPGRADEBRANCH}"
     REMOTEURL=$( git config --get remote.origin.url )
@@ -43,14 +48,17 @@ if [[ ! -z "${UPGRADEURL}" ]]; then
         else
             # Doing upgrade, discarding all local changes frist (is more save than forced pull)
             echo "Checks have passed, we are now upgrading via git."
-            git fetch origin
-            git reset --hard origin/${UPGRADEBRANCH}
-            #Remove all history
-            git rebase HEAD^
+            #Fetch latest Updates and remove all history
+            git fetch origin && git reset --hard origin/${UPGRADEBRANCH} && git rebase HEAD^
+            if [[ $? -ne 0 ]]; then
+                echo "Error: Failure while updating, will continue as is."
             fi
         fi
+    fi
+else
+    echo "UPGRADEURL is not specified in conf - No Upgrade option available."
+fi
 echo ""
-fi
 
 # At first, sync central configs if they are configured to be synced
 if [[ ! -z "${DISTCONFIGPATH_SRC}" ]]; then
@@ -85,12 +93,13 @@ if [[ ! -z "${DISTCONFIGPATH_SRC}" ]]; then
             echo "System is in configure-mode and configuration repository was found and synced, but still not configuration was found"
             echo "checking file $(dirname "$0")/../config/setup_system.conf"
             echo ""
-            echo "Please make a inital copy of config/setup_system.conf.dist to config/setup_system.conf and check all settings there."
+            echo "Please make a copy of system_setup/config.dist/setup_system.conf.dist to config/setup_system.conf and check all settings there."
             echo "Then rerun the logon script to sync the file to your repository."
             echo "Press any key to continue" && read -n 1 -s -r && exit 1
         fi
     fi
 fi
+
 #Check if Repository is defined
 if [ "${CLIENT_SOFTWARE_DST}." == "." ]; then
     echo "No central softwarerepository defined (CLIENT_SOFTWARE_DST). Skipping sync."