Fetches user_full_name (givenname + sn) and user_email from FreeIPA via
ipalib and writes them into the Thunderbird IMAP account prefs. Adds
ipalib availability check to logon_script.sh. Drops TB_MAIL_FULLNAME
config variable.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Adds SERVERFQDN_IMAP and TB_MAIL_FULLNAME to setup_system.conf.dist.
On each logon the script checks if an IMAP account for DAVTOKEN_USER@TLDOMAIN
already exists in prefs.js; if not it writes the server, identity, and account
entries and registers it with accountmanager. Idempotent — skipped when the
account is already present.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Ensures session bus socket and kwalletd5/6 talk permissions are set at
logon, so Flatseal or a missing manifest entry cannot silently break
Talk's credential storage and Plasma integration.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
--scope ... & had two problems:
1. systemd-run stayed alive in the autostart service cgroup;
KillMode=control-group sent it SIGTERM when logon_script.sh exited,
tearing down the scope and killing Talk mid-initialization.
2. The scope lacked Delegate=yes, preventing Electron's zygote from
creating sub-cgroups for the GPU/renderer processes.
The previous commit added Delegate=yes but kept --scope, so problem 1
remained: the scope was still torn down on service exit, causing the
GPU/network service crash visible in talk.log.
Switch to a transient service unit identical to the Nextcloud Desktop
Client fix: --no-block returns immediately so systemd-run is gone from
the cgroup before the service ends; --property=Delegate=yes is retained
for Electron's zygote. Tested: service active, zygote and network
service running, no GPU crash.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
systemd-run --scope ... & left the systemd-run binary running as a
background process inside the autostart service's cgroup. When
logon_script.sh exited, systemd's KillMode=control-group sent SIGTERM
to all remaining cgroup processes, including systemd-run. systemd-run,
on receiving SIGTERM while monitoring a scope, stopped the scope and
killed the Nextcloud client -- at exactly the same moment the autostart
service ended.
--no-block with --scope is not supported. Switch to a transient service
unit (drop --scope, add --no-block). systemd-run registers the unit and
returns immediately, leaving the cgroup before logon_script.sh ends.
The Nextcloud process then runs as an independent systemd user service,
unaffected by the autostart service lifecycle. Tested: Nextcloud keeps
running after systemd-run exits.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Nextcloud Talk is an Electron app. Electron uses a zygote process to
fork sandboxed child processes (GPU, renderer, network service) into
their own sub-cgroups. systemd-run --scope without Delegate=yes locks
down the cgroup — sub-cgroups cannot be created — so the zygote fails,
causing the GPU process to crash immediately on startup.
Adding --property=Delegate=yes hands cgroup management to the scope,
allowing flatpak/bubblewrap and Electron's zygote to create the
sub-cgroups they need. Tested: no GPU crash with this flag set.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
/var/tmp is persistent on-disk storage. The encryption key must never
be written to disk, even temporarily. Replaced all occurrences of
/var/tmp/IPAVAULTKEY.txt with ${XDG_RUNTIME_DIR}/IPAVAULTKEY, which
is a per-user tmpfs directory (/run/user/<UID>) created by
systemd-logind: guaranteed memory-only, mode 0700, wiped on logout.
Also removed the TODO comment that tracked this exact issue.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
setsid -f forks the process into a new session but leaves it in the
calling service's cgroup. systemd-run --user --scope moves it into its
own transient scope cgroup so the autostart service can finish normally.
Added & to background the launch, replacing the fork that setsid -f
was providing. Tested: scope is created and Talk starts correctly.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Same root cause as the gocryptfs and Nextcloud fixes: kwalletd6 is a
long-running daemon that stays alive for the entire KDE session.
Launching it with setsid keeps it in the autostart service cgroup,
preventing app-logon_script.sh@autostart from reaching finished state.
Replace setsid with systemd-run --user --scope so kwalletd6 runs in
its own transient scope cgroup.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
KDE Plasma runs each autostart .desktop entry as a systemd user unit.
systemd tracks service liveness by cgroup membership, not just the
main PID. Any process forked inside the service — even via setsid or &
— stays in the service's cgroup and keeps app-logon_script.sh@autostart
in active (running) state indefinitely after logon_script.sh exits.
mount_ecrypt_home.sh: wrap the gocryptfs mount call with
systemd-run --user --scope --unit=gocryptfs-home
The FUSE daemon that gocryptfs forks now lives in its own transient
scope cgroup. Exit-code propagation is unchanged because systemd-run
--scope returns the main process's exit code.
0050_nextcloud_desktopclient/user_run.sh: replace
/usr/bin/setsid ... &
with
systemd-run --user --scope --unit=nextcloud-client ... &
setsid creates a new session but does not move the process out of the
cgroup; systemd-run --scope does.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Free-space start alignment
parted reports free space starting at 0,02 MiB (before the GPT
alignment boundary). The collect_free_space awk now rounds the start
up to the next whole MiB (ceiling) and enforces a minimum of 1 MiB,
then recomputes the usable size from the adjusted start. This prevents
parted from being asked to create a partition at 0 MiB, which it
cannot do.
Locale-independent partition creation
The previous `printf 'Yes\n' | parted mkpart` relied on parted
accepting an English answer to its alignment-confirmation prompt.
On a German-locale system parted asks "Ist dies noch akzeptabel?"
and ignores "Yes", causing mkpart to fail. Replaced with `parted -s`
(script/non-interactive mode), consistent with every other parted
call in the script.
Correct new-partition detection on disks with gaps
The old heuristic took the highest partition number after partprobe.
On a disk where existing partitions are numbered 2/3/4, a new
partition in the gap before them receives number 1 — making the
old heuristic point at partition 4 (the existing btrfs volume) and
subsequently run mkfs.btrfs on it. The new awk matches by start
position (OEMDRV_START ± 1 MiB) instead, which is unambiguous
regardless of how numbers are assigned.
Infinite loop on EOF stdin
When the selection while-loop's `read` hits EOF (e.g. stdin exhausted
after sudo consumed a piped password), it returns exit code 1 with an
empty INPUT, which falls through to "Invalid input." and spins
forever. Added `|| { echo; echo "Aborted."; exit 0; }` to all three
read calls in the loop.
install.md: drop stale install_from_repo.sh reference from title;
clarify that REPO_URL/REPO_BRANCH overrides are optional.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
install.sh writes the last 12 chars of the DMI system UUID to
config.d/machine_uuid.sys (0444) after git clone, so non-root scripts
can derive the hardware-bound hostname without needing dmidecode.
conf.dist reads machine_uuid.sys first; falls back to dmidecode (root)
or hostname -s (user) if the file is absent.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Instead of dying immediately, check_tools now lists missing packages,
asks the user to install them with dnf, and re-verifies after install.
Decline still aborts as before.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Each variable is now prompted in a retry loop so a failed test re-prompts
that specific variable instead of restarting the whole wizard. Adds DNS-based
IPA domain validation (_ldap._tcp SRV + _kerberos TXT + _kerberos._udp SRV),
matching what ipa-client-install --domain performs. Fixes syntax errors
(bare `do` → `while true; do`, `continue` → `break`). Expands VARS to include
IPAVAULTNAME, CLIENT_SOFTWARE_SRC, DISTCONFIGPATH_SRC.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
After server checks pass, present all ks_base_profiles/*.cfg files
with their first-paragraph description and require the user to pick
one. The selected profile is copied to ks.cfg in the repo root.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Instead of obtaining a Nextcloud WebDAV token, verify the configured
servers directly:
- Nextcloud: check /status.php for "installed":true and show version
- FreeIPA: check /ipa/session/json for HTTP 200 or 401
Both checks offer restart or quit on failure.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Pass DISPLAY and WAYLAND_DISPLAY explicitly through the su call in
install.sh so Firefox can connect to the user's display session.
Remove the now-unnecessary DISPLAY=:0 fallback from get_nc_token.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Before partitioning, check_repo_url() downloads
system_setup/install.sh from REPO_URL and compares its sha256sum
against the running script. Warns and asks to continue if the URL
is unreachable or the checksums differ.
Also accept an optional first argument to override REPO_URL.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- system_setup/configure.sh: interactive first-time setup wizard that
edits config.d/configure.conf, tests the encrypted home mount, and
obtains a Nextcloud WebDAV token
- configure.md: short usage documentation for configure.sh
- system_setup/install.sh: after cloning the repo, ask whether to run
configure.sh immediately (as the sudo-invoking user via su)
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Replaces KDE desktop environment group and KDE-specific packages
with Cinnamon equivalents (transmission-gtk replaces ktorrent).
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Daniel unbrot Pätzold
obel1x
unbrot